Handleiding
Je bekijkt pagina 18 van 96
Problem Possible cause Solution
Temperature set in the appliance is
too low and the ambient tempera‐
ture is too high.
Set a higher temperature. Refer to
"Control panel" chapter.
Water flows on the rear plate of the
refrigerator.
During the automatic defrosting
process, frost melts on the rear
plate.
This is correct.
There is too much condensed water
inside the fridge.
Door was opened too frequently. Open the door only when necessa‐
ry.
Door was not closed completely. Make sure the door is closed com‐
pletely.
Stored food was not wrapped. Wrap food in suitable packaging be‐
fore storing it in the appliance.
This is normal that during summer
and autumn more condensation can
form due to the increased air and
food humidity. Fridge does not pro‐
duce any moisture. After this period,
the humidity in the fridge decreases
itself.
In summer and autumn, set the
warmer temperature in the refrigera‐
tor (approx. 6-7°C).
There are water drops on the glass
shelves.
There is too much moisture inside
the fridge.
Wipe the glass shelves with a cloth
to remove water drops.
Water flows on the floor. The melting water outlet is not con‐
nected to the evaporative tray above
the compressor.
Attach the melting water outlet to
the evaporative tray.
Temperature cannot be set. The Extra Freeze function or Extra
Cool function is switched on.
Switch off Extra Freeze function or
Extra Cool function manually, or
wait until it deactivates automatical‐
ly. Refer to "Extra Freeze function"
or "Extra Cool function" section.
The temperature in the appliance is
too low/too high.
The temperature is not set correctly. Set a higher/lower temperature.
The door is not closed correctly. Refer to the "Closing the door" sec‐
tion.
The food is too hot. Let the food cool down before stor‐
age.
Too much food is stored at the
same time.
Store less food at the same time.
The door has been opened often. Open the door only if necessary.
The Extra Freeze function is switch‐
ed on.
Refer to the "Extra Freeze function"
section.
The Extra Cool function is switched
on.
Refer to the "Extra Cool function"
section.
There is no cold air circulation in the
appliance.
Ensure cold air circulation in the ap‐
pliance. Refer to the "Hints and tips"
chapter.
18 ENGLISH
Bekijk gratis de handleiding van AEG PCB7000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEG |
| Model | PCB7000 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 8903 MB |
