AEG LWR7116O4B handleiding
Handleiding
Je bekijkt pagina 29 van 52
Changing the delay start after the
countdown has started
To change the delay start:
1. Touch the Start/Pause button to pause
the appliance. The related indicator
flashes.
2. Touch the Delay Start button repeatedly
until the display shows the desired delay
time.
3. Touch the Start/Pause button again to
start the new countdown.
11.8 The ProSense System load
detection
The programme duration in the display is
referred to a medium/high load.
After touching the Start/Pause button, the
maximum declared load indicator goes off,
the indicator
flashes, the ProSense
System starts the laundry load detection:
1. The appliance detects the load in the first
30 seconds, the indicator
flashes. the
digit area shows and the drum
rotates shortly.
2. At the end of the load detection, the
indicator stop flashing. The
programme duration will be adjusted
accordingly and could increase or
decrease. After further 30 seconds, the
water filling starts.
At the end of the load detection, in case of
drum overload, the indicator is
flashing in the display.
In this case, for 30 seconds, it is possible to
pause the appliance and remove the
exceeding garments.
Once removed the exceeding garments,
touch the Start/Pause button to start the
programme again. The ProSense System
phase can be repeated up to three times (see
point 1).
Important! If the laundry amount will not be
reduced, the washing programme starts
anyway, despite the overload. In this case, it
will be not possible to guarantee the best
washing results.
About 20 minutes after the programme
start, the programme duration could be
adjusted again depending on the
capacity of water absorption of the
fabrics.
The ProSense System detection is
carried out with complete washing
programmes only (no skipping phase
selected).
The ProSense System is not available
with some programmes, such as Wool/
Handwash, programmes with short
cycles and without washing phase.
11.9 Programme phase indicators
When the programme starts the indicator of
the running phase flashes and the other
phase indicators are steady on.
E.g. the washing or pre wash phase is
running: .
When the phase ends the relevant indicator
stops flashing and is steady on. The next
phase indicator starts flashing.
E.g. the rinse phase is running:
.
If you select the a steam programme, the
steam phase indicator comes on.
11.10 Interrupting a programme and
changing the options
When the programme is running, you can
change only some options:
1. Touch the Start/Pause button.
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the Start/Pause button again.
The washing programme continues.
ENGLISH 29
Bekijk gratis de handleiding van AEG LWR7116O4B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEG |
| Model | LWR7116O4B |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 4444 MB |
