Handleiding
Je bekijkt pagina 94 van 440
Frequency/Protocol WiFi: 2.4 GHz / 802.11
bgn
Power WiFi 2.4 GHz: <20 dBm
Encryption WPA-PSK, WPA2-PSK,
WPA3-SAE
Installing the app
Take the following steps to connect the
appliance to WiFi :
1. Make sure that the appliance is plugged
into a power socket and turned on.
2. Make sure that your mobile device is
connected to the same wireless network
you want to add your appliance to.
3. To download the app, use your mobile
device's camera to scan the QR code
located on the back cover of the user
manual. You can also download the app
directly from Google Play (Android) or
App Store (iOS).
4. Open the app and register to create an
account.
Configuring the appliance wireless
connection
The onboarding is possible only for 20
seconds after activating the control
panel. If the symbol turns off,
deactivate and activate the control panel
again.
Follow the instructions in the app to complete
the onboarding process:
1. Make sure the fan and the lighting are
turned off.
2. Touch and hold the symbol on your
appliance for 3 seconds, the
symbol
starts to flash continuously. The
onboarding process is ongoing.
3. Continue to follow the instructions in the
app to complete the onboarding process.
To stop the onboarding process, touch
the or any of the speed level symbols.
After the successful onboarding, the
appliance emits a single beep, and the
indicator stops flashing.
If the onboarding process is unsuccessful, the
indicator flashes rapidly for 6 seconds and
then turns off. Repeat the procedure.
If the onboarding process exceeds 1
minute, the control panel enters standby
mode, the indicator turns off, and the
app provides feedback on the onboarding
status.
After onboarding, the symbol is
visible once the control panel is activated
and a connection to the internet is
established.
Each time the action is performed using
the app, the indicator blinks 3 times.
Disabling / Enabling the appliance
wireless connection
To temporarily disable the WiFi connection:
1. Make sure the fan and the lighting are
turned off.
2. Touch and hold the symbol for 3
seconds until you hear a beep.
The symbol blinks twice and the
symbol turns off.
To enable the WiFi connection again:
1. Make sure the fan and the lighting are
turned off.
2. Touch and hold the symbol for 3
seconds until you hear a beep.
The
symbol blinks once and the
symbol turns on when the connection is
estabilished.
Resetting the appliance wireless
connection
To offboard the WiFi network:
1. Make sure the fan and the lighting are
turned off.
94
Bekijk gratis de handleiding van AEG DKA9971B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEG |
| Model | DKA9971B |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 39492 MB |
