Handleiding
Je bekijkt pagina 93 van 440
While preparing food that generates little
odour over an extended period (e.g.
simmering), the hood may stop and then
restart within a few seconds. If the hob
power level is very low, the generated
odour may not be sufficient for
AutoSense® to function properly. If your
hood switches off and does not restart,
use manual mode to operate it.
To permanently deactivate the function:
1. Make sure the fan and the lighting are
turned off.
2. Touch and hold the
and symbols.
and indicators blink twice.
To activate the function again:
1. Make sure the fan and the lighting are
turned off.
2. Touch and hold the and symbols.
and indicators blink once.
5.4 Filter notification
The filter alarm serves as a reminder to clean
the grease filter and either replace or clean
the charcoal filter, depending on its type. The
symbol blinks regularly for 30 seconds if
the grease filter must be cleaned. The
symbol blinks twice per every second for 30
seconds if the charcoal filter must be
replaced or cleaned.
This function activates independently
after 40 hours of operation for grease
filter and 160 hours of operation for
charcoal filter.
Refer to Cleaning the grease filter in the
Care and cleaning chapter.
Refer to cleaning the charcoal filter or
replacing the charcoal filter in Care and
cleaning chapter.
To reset the function counter in the
notification period, touch the symbol for 3
seconds. The symbol stops blinking for the
correct reset.
The function counter for charcoal filter is
disabled by default. For recirculation
mode, it must be activated.
To activate or deactivate the counter for
charcoal filter:
1. Switch on the control panel.
2. Make sure the fan and the light are turned
off.
3. Touch the
symbol for 3 seconds.
The function is activated if symbols
and
blink once. The function is deactivated if
symbols and blink twice.
5.5 AutoSense® filter notification
Filter alarm reminds to clean the AutoSense®
filter. The symbol flashes rapidly for 30
seconds if the filter must be cleaned.
Refer to Care and cleaning chapter.
To reset the function during the notification
period:
1. Make sure that the fan is turned off.
2. Touch and hold the
symbol for 3
seconds.
The symbol
stops flashing for the correct
reset.
5.6 WiFi connectivity setup
This feature enables you to connect your
appliance to a WiFi network and pair it with
your mobile device. Using this feature, you
can access additional functions, control and
monitor your appliance from your mobile
device, and receive notifications.
To connect the appliance you need:
• Wireless network with the Internet
connection,
• Mobile device connected to your wireless
network.
93
Bekijk gratis de handleiding van AEG DKA9971B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEG |
| Model | DKA9971B |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 39492 MB |
