AEA RPQ503 handleiding
Handleiding
Je bekijkt pagina 6 van 16
FRONT PANEL GUIDE
3) EQ IN Switch: OUT bypasses the EQ circuitry; IN engages the EQ
circuitry. The green LED will indicate when the EQ is engaged.
4) Low Frequency Curve Gain and Filter Control: Dual-concentric
potentiometer controls Curve Gain and Filter Frequency.
Black Knob (Frequency) - Continuously variable control adjusts the -3 dB
break-frequency (as measured at full cut; -20 dB on the LF Gain) of the filter
from 40 Hz to 675 Hz; max LF reduction is -20 dB.
Yellow Knob (Gain) - Continuously variable control adjusts the LF gain
from -20 dB to +20 dB; the slope of the CurveShaper™ EQ varies as Curve
Frequency and Curve Gain settings interact.
GENERAL GUIDELINES
6
1
2
3
4
5
6
8
9
7
1) Audio Signal Level Indicators:
Green LED - On at -20 dBu to
indicate the presence of signal
Yellow LED - On at 0dBu
Red LED - On at +20dBu to warn of
approaching signal overload
2) High Frequency Curve Gain and
Filter Control: Dual-concentric
potentiometer controls Curve Gain
and Filter Frequency.
Black Knob (Frequency) - Continuously
variable control adjusts the +3 dB break-
frequency (as measured at full boost; +20
dB on the HF Gain) from 2 kHz to 28 kHz.
Yellow Knob (Gain) - Continuously
variable control adjusts the HF gain
from -20 dB to +20 dB; the slope of the
CurveShaper™ EQ varies as
Curve Frequency and Curve Gain settings
interact.
Bekijk gratis de handleiding van AEA RPQ503, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEA |
| Model | RPQ503 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2465 MB |
