Advantech USB-4716 handleiding
Handleiding
Je bekijkt pagina 19 van 30
11 USB-4716 User Manual
Chapter 3 Signal Connections
3.3.2 Differential Input Connections
The differential input channels operate with two signal wires for each channel, and
the voltage difference between both signal wires is measured. On USB-4716, when
all channels are configured to differential input, up to 8 analog channels are avail-
able.
If one side of the signal source is connected to a local ground, the signal source is
ground-referenced. Therefore, the ground of the signal source and the ground of the
card will not be exactly of the same voltage. The difference between the ground volt-
ages forms a common mode voltage (Vcm ).
To avoid the ground loop noise effect caused by common-mode voltages, you can
connect the signal ground to the Low input. Figure 3-3 shows a differential channel
connection between a grounded-reference signal source and an input channel on
USB-4716. With this connection, the PGIA rejects a common-mode voltage Vcm
between the signal source and USB-4716 ground, shown as Vcm in Figure 3.3.
Figure 3.3 Differential Input Channel Connection
Note! In differential input mode, the input channel n should be used with chan-
nel n+1.
(n=0,2,4…14)
Bekijk gratis de handleiding van Advantech USB-4716, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | USB-4716 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1804 MB |
