Advantech TPC-110W handleiding
Handleiding
Je bekijkt pagina 34 van 42

TPC-100W Series User Manual 18
2.4 Powering on the System
A 2-pin power connector is provided in the accessory box. To power the system, con-
nect the power connector to Vdc power lines, then plug the power lines into the sys-
tem power receptor.
This product is intended to be supplied by a UL-Listed power supply suitable for use
at Tma 60°C min. The power supply output must comply with PS2 (or LPS), ES1 (or
SELV) standards with the following ratings: 24Vdc, 0.83A min. or 24Vdc, 1.2A min. to
match the unit rating. Its output rating is: 48Vdc, 0.53A min. for PoE input. Please
contact Advantech for further information.
The terminal block is suitable for 16~26 AWG (10A). The recommended torque value
is 2.5 lb-in. User copper conductors only. Installation must be performed by a quali-
fied technician.
Warning! The system may become damaged when the power is turned on and the
power source is not connected to the correct pins.
Le système peut être endommagé lors de la mise sous tension et la
source d'alimentation n'est pas connectée aux bonnes broches.
Warning! The PoE networks should not be connected to external plant routing or
equivalent systems.
Les réseaux PoE sans routage vers l'installation extérieure, ou équiva-
lent.
Bekijk gratis de handleiding van Advantech TPC-110W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Advantech |
Model | TPC-110W |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 6140 MB |