Advantech SQF-P10 P8 handleiding
Handleiding
Je bekijkt pagina 29 van 49
SQFlash
CompactFlash Card
Specifications subject to change without notice, contact your sales representatives for the most update information.
REV 1.7 Page 29 of 49 Feb. 3, 2014
28. SMART DISABLE OPEMTIONS (code: B0h);
This command disables all SMART capabilities within the module.
29. SMART RETURN STATUS (code: B0h);
This command causes the module return the reliability status of the module to the host.
30. STANDBY (code: 96h or E2h);
This command causes the module to set BSY, enter the Sleep mode (which corresponds to the
ATA ”Standby” Mode), clear BSY and return the interrupt immediately.
31. STANDBY IMMEDIATE (code: 94h or E0h);
This command causes the module to set BSY, enter the Sleep mode (which corresponds to the ATA
Standby Mode), clear BSY and return the interrupt immediately.
32. WRITE BUFFER (code: E8h);
This command enables the host to overwrite contents of the module’s sector buffer with any data pattern
desired.
33. WRITR DMA (code: CAh or CBh);
This command writes from “1” to “256” sectors as specified in the Sector Count register using the DMA
data transfer protocol. A sector count of “0” requests “256” sectors transfer. The transfer begins at the
sector specified in the Sector Number register.
34. WRITE MULTIPLE (code: C5h);
This command is similar to the WRITE SECTORS command. Interrupts are not presented on each sector,
but on the transfer of a block which contains the number of sectors defined by Set Multiple command.
35. WRITE LONG SECTOR (code: 32h or 33h);
This command is provided for compatibility purposes and nearly performs “1” sector WRITE SECTOR
command except that it transfers the data and 4 bytes appended to the sector. These appended 4 bytes
are not written on the flash memories.
36. WRITE SECTOR(S) (code: 30h or 31h);
This command writes from “1” to “256” sectors as specified in the Sector Count register. A sector count of
“0” requests “256” sectors transfer. The transfer begins at the sector specified in the Sector Number
register.
37. WRITE VERIFY (code: 3Ch);
This command is similar to the WRITE SECTOR(S) command, except that each sector is verified before
the command is completed.
Bekijk gratis de handleiding van Advantech SQF-P10 P8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | SQF-P10 P8 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7715 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, Blue, White |
| Breedte | 42.8 mm |
| Diepte | 36.4 mm |
| Hoogte | 3.3 mm |
| Intern geheugentype | SLC |
