Advantech ROM-7420 handleiding
Handleiding
Je bekijkt pagina 17 van 88
9 ROM-7420 User Manual
Chapter 2 H/W Installation
2.3.1 ROM-7420 (Part-A)
ROM-7420 is a cost-effective, low-power, and high-performance Q7 module board
without heatsink, geared to satisfy the needs for various industrial computing equip-
ment. Based on Freescale i.MX6 Processor - ARM® CortexTM A9 architecture, there
are DDR3, iNAND flash and other main ICs. ROM-7420 is simple assembly, compact
size, fanless module board with extremely low power consumption.
2.3.2 ROM-DB7500 (Part-B)
ROM-DB7500 is an evaluation carrier board in MiniITX form factor, which is designed
for Advantech RISC QSeven module only. There are 2 LVDS, 1 VGA, 1 HDMI, 4 USB
(2x USB Type A, 1 x USB OTG, 1x 4-pin connector), 2 CAN bus with 5V level, 4
UART (2wire Tx Rx, 3.3V level), Mini PCIe slot, LAN jack and audio jack for MIC/
speaker test. It also has built in SIM slot for 3G module and onboard SD/eMMC card
slot as extra storage. For data storage, ROM-DB7500 supports SATA2 interface so
user can connect SATA hard disk to evaluation board directly. For more detail regard-
ing ROM-DB7500, please refer to ROM-DB7500 datasheet.
2.3.3 7” LVDS LCD Module (Part-B1)
The 7.0 inch Color TFT-LCD Module designed with wide viewing angle; wide operat-
ing temperature and long life LEDs backlight is well suited to be the display units for
Industrial Applications. LED driving board for backlight unit is included in this panel
and the structure of the LED units is replaceable. It’s built in timing controller and
LVDS interface. The display supports the WVGA (800 (H) x 480(V)) screen format
and 16.2M colors (RGB 24bits) or 262K (RGB 18bits) selectable.
2.3.4 LCD Backlight Cable (Part-B2)
The LVDS backlight cable connects ROM-DB7500 (LVDS PWR1&LVDS PWR2) with
the LCD backlight connector of 7” LVDS LCD Module.
2.3.5 LVDS Cable (Part-B3)
The LVDS cable connects ROM-DB7500 LVDS connector (LVDS1&LVDS2) with the
LCD signal connector of 7” LVDS LCD Module.
2.3.6 SQFlash SD Card (Part-C)
The SQFlash SD card is a standard SD device. It is the flash-based solid-state drive
available and uses SLC NAND flash memory, making it ideal as an embedded SSD
solution. It connects on SD1 of ROM-DB7500.
2.3.7 SATA Power Cable (Part-D1)
The SATA power cable provides the power signal for SATA HDD by connecting ROM-
DB7500 (CN4) with the SATA HDD.
2.3.8 SATA Cable (Part-D2)
The SATA cable provides the control signal with SATA HDD by connecting ROM-
DB7500 (CN3) with the SATA HDD. ROM-DB7500 supports only up to SATA2 (3.0
GB), no SATA3 support.
2.3.9 Mini USB Host Cable (Part-E)
The mini USB Host cable connects ROM-DB7500 (USB_OTG1) with one USB client
device. For example, USB mouse/keyboard or flash disk.
Bekijk gratis de handleiding van Advantech ROM-7420, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | ROM-7420 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15702 MB |
