Advantech PPC-312SW handleiding
Handleiding
Je bekijkt pagina 18 van 66
8
PPC-312S(W) RPL User Manual
2.1 Transport and Unpacking
2.1.1 Transport
When accepting a delivery, please check the packaging for visible transport dam-
age and check the delivery for completeness by comparing it with your order. If
you notice any shipping damage or inconsistencies between the contents and
your order, please inform the responsible delivery service immediately.
During transportation, the PPC should be protected from excessive mechanical
stress. If the PPC is transported or stored without packaging, shocks, vibrations,
pressure and moisture may impact the unprotected unit. A damaged packaging
indicates that ambient conditions have already had a massive impact on the de-
vice. Therefore, please use the original packaging during transportation and stor-
age.
If the PPC is transported in cold weather or is exposed to extreme variations in
temperature, make sure that moisture (condensation) does not build up on or in-
side the HMI device. Moisture can result in short-circuits in electrical circuits and
damage the device. To avoid that, please store the PPC in a dry place and bring
the PPC to room temperature before starting it up. If condensation occurs, a delay
time of approximately 12 hours must be allowed to make sure the PPC is com-
pletely dry before the PPC is switched on.
2.1.2 Unpacking and Setup
Follow these steps to setup the PPC-312S(W) RPL device:
1. Unbox the PPC-312S(W) RPL device.
2. Adjust the power mode if necessary (default: AT mode), refer to Section
2.2.2 for details.
3. Connect the power connector to the 24 VDC power lines of a power adapter
or in-house power source. DC power source complies with ES1 and PS2
requirements, has output rating of 24 Vdc, a minimum operating tempera-
ture of 50°C, and undergoes evaluation according to IEC/UL 60950-1
and/or IEC/UL 62368-1.
Figure 2.1 Power Connector and Power Lines
Warning!
The system may get damaged when the power is turned on
and the power source is not connected to the correct pins.
Le système peut être endommagé lorsque l'alimentation est
allumée et que la source d'alimentation n'est pas connectée
aux broches appropriées.
Bekijk gratis de handleiding van Advantech PPC-312SW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | PPC-312SW |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8533 MB |
