Advantech PCM-3718H handleiding
Handleiding
Je bekijkt pagina 29 van 80
21 Chapter 2
2.5 Hardware Installation
Installing the module
1. Turn the PC’s power off. Turn off the power of any peripheral
devices such as printers and monitors.
2. Disconnect the power cord and any other cables from the back of the
computer.
3. Remove the system unit cover (see the user’s guide for your chassis
if necessary).
4. Remove the CPU card from the chassis (if necessary) to gain access
to the card’s PC/104 connector.
5. Connect connector J1 of the PCM-3718 card to the PC/104 connec-
tor. Carefully align the pins with the PC/104 connector. Slide the
module into the connector. The module pins may not slide all the
way into the connector; do not force the pins into place, or the mod-
ule may be damaged.
6. Fasten the module to the CPU card by using the included brass
screw. Screw the brass spacer into the threaded hole on the CPU
card. Do not tighten too much, or the threads may be damaged.
7. Attach any accessories to the PCM-3718 card using 20 pin cables.
8. Reinstall the CPU card and replace the system unit cover. Reconnect
the cables you removed in step 2. Plug in and turn on the power.
This completes the hardware installation. Install the software driver as
described in the following section.
Warning! TURN OFF your PC power supply whenever you
install or remove the PCM-3718H/3718HG or
connect and disconnect cables.
Bekijk gratis de handleiding van Advantech PCM-3718H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | PCM-3718H |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5483 MB |
