Advantech PCM-3718H handleiding
Handleiding
Je bekijkt pagina 22 van 80
PCM-3718 Series User Manual 14
2.2.2 DMA Channel and Timer Clock Selection (JP1)
The PCM-3718 cards support DMA data transfer. The bottom pins of JP1
provide selection of DMA channel 1 or 3, as shown in the following fig-
ure.
The upper three pins of JP1 control the input clock frequency for the 8254
programmable clock/timer of the module.
You have two choices: 10 MHz or 1 MHz. This lets you generate pacer
output frequencies from 2.5 MHz to 0.00023 Hz (71 minutes/pulse).
The following equation gives the pacer rate:
Pacer rate = Fclk / ( Div1 * Div2 )
(Fclk, 1 MHz or 10 MHz, is set by JP1 as illustrated below. Div1 and
Div2 are dividers set in counter 1 and counter 2 in the Intel 8254 counter.
See page 51 for more information on the counter/timer applications).
2.2.3 Channel Configuration, S. E. or diff. (JP2)
The PCM-3718 cards offer 16 single-ended or eight differential analog
input channels. Jumper JP2 sets the analog input channels as 16 single-
ended or 8 differential inputs as shown below:
10M1M
D
MA1 DMA3
Channel1
10M1M
DMA1 DMA
3
Channel3 (defau
lt)
10M1M
D
MA1 DMA3
10 MHz
10M1M
DMA1 DMA3
1 MHz (default
)
S/E DIFF
16 S.E. inputs
S/E DIFF
Eight differential inputs (default)
Bekijk gratis de handleiding van Advantech PCM-3718H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | PCM-3718H |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5483 MB |
