Advantech PCM-3680 handleiding
Handleiding
Je bekijkt pagina 3 van 4
3 PCM-3680 Startup Manual All product specifications are subject to change without notice.
STARTUP MANUAL
Memory Area
Once the memory segment for the base address is
selected, the offset will be automatically assigned
for Port 1, Port 2, and hardware reset. The following
table shows the base addresses of the CAN control-
lers.
Software Overview
Please install the Advantech CAN WDM Driver
before using PCM-3680. You can find the driver in
the CD come along with the product.
Advantech CAN Windows WDM&CE Driver is
composed of bus drivers, ports drivers, tools and
examples. Bus drivers and ports drivers, which run
in PeliCAN mode, are used to drive SJA1000 chip
on Advantech CAN device. Bus drivers and ports
drivers are compliant with PCI and ISA bus, and
provide the users with coherent operation interfaces.
Users can directly write applications with windows
API. Examples of VC, VB, VB.NET, C#.NET,
VC.NET, eVC are supplied in the package, provid-
ing a reference for users to develop applications.
When developing work is completed, users can use
test tools to verify if functions of the application are
correct.
Installation
After the installation of the driver, please start the
“Add Hardware Wizard” to add the hardware
device.
Then follow the steps as shown in the figures below.
Base address (hex) CAN Controller
base:0000h - base:00FFh Basic- Port 1
base:0100h - base:01FFh HW reset Basic - Port 1
base:0200h - base:02FFh Basic- Port 2
base:0300h - base:03FFh HW reset Basic - Port 2
base:0400h - base:0FFFh Not used
DataMonitor Utility
Bekijk gratis de handleiding van Advantech PCM-3680, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | PCM-3680 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 889 MB |
