Advantech PCM-3680 handleiding
Handleiding
Je bekijkt pagina 2 van 4
2 PCM-3680 Startup Manual
Installation
Card Configuration
The PCM-3680 has two ports, each with one jumper.
The jumpers set the IRQ for the ports, which can be
configured separately. A DIP switch sets the memory
base address for each port. The following chart shows
the function of the jumper and the switch (see the previ-
ous page for jumper and switch locations).
Default Settings
• Port 1 is set for COM1 (IRQ=12, Memory address =
DA00:0000).
• Port 2 is set for COM2 (IRQ=15, Memory address
=DA00:0200).
If you need to change these settings, see the following
sections. Otherwise, you can simply install the card.
Note that you will need to disable your CPU card's
onboard COM ports, if any, or set them to alternate
addresses/IRQs.
Jumpers and Switches
Jumpers JP1 and JP2 set the interrupts for Port 1 and
Port 2, respectively. You can choose any IRQ from 3 to
15, except 8, 13 and 14. When you choose IRQs, make
sure they are not used for other cards in the system. The
following figures show the card's default settings.
Note: It is suggested to set the terminator resistor
(120Ω) to keep the baud rate performance.
Switch and Jumper Functions
IRQ Setup
JP1 Port 1
JP2 Port 2
Memory base address
SW1 Port 1, Port 2
JP5/JP6 Setting (Terminator Resistor Setup)
Status Value of Terminator
Resistor (
Ω)
Open Mode 0
Close Mode 120
Memory Base Address (SW1)
The memory base address for the PCM-3680, which
requires 4 KB of address space, is made up of the mem-
ory segment and its associated offset. The address for
the memory segment is set through SW1, a six-position
DIP switch. You can choose any base address from
C800 to EF00. The following table shows the DIP
switch settings and the corresponding base addresses.
Memory Address Configuration (SW1)
Address/
DIP Switch
A12 A13 A14 A15 A16 A17
C800H on on on off on on
C900H off on on off on on
CA00H on off on off on on
CB00H off off on off on on
CC00H on on off off on on
CD00H off on off off on on
CE00H on off off off on on
CF00H off off off off on on
D000H on on on on off on
D100H off on on on off on
D200H on off on on off on
D300H off off on on off on
D400H on on off on off on
D500H off on off on off on
D600H on off off on off on
D700H off off off on off on
D800H on on on off off on
D900H off on on off off on
DA00H on off on off off on
DB00H off off on off off on
DC00H on on off off off on
DD00H off on off off off on
DE00H on off off off off on
DF00H off off off off off on
E000H on on on on on off
E100H of on on on on off
E200H on off on on on off
E300H off off on on on off
E400H on on off on on off
E500H off on off on on off
E600H on off off on on off
E700H off off off on on off
E800H on on on off on off
E900H off on on off on off
EA00H on off on off on off
EB00H off off on off on off
EC00H on on off off on off
ED00H off on off off on off
EE00H on off off off on off
EF00H off off off off on off
Bekijk gratis de handleiding van Advantech PCM-3680, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | PCM-3680 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 889 MB |
