Advantech PCIE-1810 handleiding
Handleiding
Je bekijkt pagina 16 van 60
PCIE-1810 User Manual 6
2.1 Initial Unpacking Check
Before setting up the system, check that the items listed below are included and in
good condition. If any item does not accord with the table, please contact your dealer
immediately.
PCIE-1810 card
Startup or User Manual
2.2 Hardware Installation and Configuration
2.2.1 Installation
Before you install your PCIE-1810, please make sure you have the following compo-
nents:
PCIE-1810 card
PCIE-1810 User Manual
Advantech DAQNavi SDK and the corresponding device driver
Personal computer or workstation with PCI Express interface
Accessories (optional)
– 1700030423-01 10-pin flat cable for MDSI synchronization, 10 cm
– PCL-10168H-1E 68-pin SCSI shielded cable with noise rejection, 1 m
– PCL-10168H-2E 68-pin SCSI shielded cable with noise rejection, 2 m
– PCL-10168-1E 68-pin SCSI shielded cable, 1 m
– PCL-10168-2E 68-pin SCSI shielded cable, 2 m
– ADAM-3968-AE 68-pin DIN rail SCSI wiring board
When the necessary components are prepared, you can begin the installation proce-
dure as follows:
1. Install Advantech DAQNavi SDK and the corresponding device driver. They can
be downloaded from Advantech website.
2. Turn off the computer. (for PCI or PCIe cards only)
3. Install the hardware device.
4. Turn on the computer. (for PCI or PCIe cards only)
5. Use Navigator to test the functionality of the hardware.
6. Read software manual and examples.
7. Write your own applications.
Bekijk gratis de handleiding van Advantech PCIE-1810, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | PCIE-1810 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4970 MB |
