Advantech PCIE-1802 handleiding
Handleiding
Je bekijkt pagina 20 van 44
PCIE-1802 User Manual 14
3.1 Overview
Maintaining signal connections is one of the most important factors in ensuring that
your application system is sending and receiving data correctly. A good signal con-
nection can avoid unnecessary and costly damage to your PC and other hardware
devices. This chapter provides useful information about how to connect input and
output signals to the PCIE-1802 cards via the I/O connector.
3.2 Jumper Settings
Setting the BoardID Switch (SW1)
The PCIE-1802 has a built-in DIP switch (SW1), which is used to define each card's
board ID. You can determine the board ID on the register as shown in Table 2.1.
When there are multiple cards on the same chassis, this board ID setting function is
useful for identifying each card's device number through board ID. We set the PCIE-
1802 board ID as 0 at the factory. If you need to adjust it to other board ID, set the
SW1 by referring to DIP switch setting.
* Default Setting
Table 3.1: Board ID Settings
SW13210
BoardID ID3 ID2 ID1 ID0
0* ON ON ON ON
1ONONONOFF
2ONONOFFON
3ONONOFFOFF
4 ON OFF ON ON
5 ON OFF ON OFF
6ONOFFOFFON
7ONOFFOFFOFF
8 OFF ON ON ON
9 OFF ON ON OFF
10 OFF ON OFF ON
11 OFF ON OFF OFF
12 OFF OFF ON ON
13 OFF OFF ON OFF
14 OFF OFF OFF ON
15 OFF OFF OFF OFF
Bekijk gratis de handleiding van Advantech PCIE-1802, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | PCIE-1802 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4073 MB |
