Advantech PCIE-1122B-AE handleiding
Handleiding
Je bekijkt pagina 5 van 18
BitFlow, Inc. • 400 West Cummings Park, Suite 5050 • Woburn, MA 01801 USA • +1-781-932-2900 • www.bitflow.com
Getting Started with the BitFlow SDK 6.6 5
I SDK
Install the SDK
1. Run the installer executable to start the process.
2. Follow the instructions of the installer.
3. When the installer is finished, turn the computer off and install your BitFlow
board(s).
4. If you are upgrading and have left your boards in your system, you may be
need to reboot your computer when the installation is complete.
Install your BitFlow Hardware
1. Make sure you observe proper static protection procedures when installing
any hardware in a PC.
2. Make sure the PC is powered down and is not connected to the AC
supply.
3. Open the PC. Locate an unused PCIe slot of the correct type for you board.
See the illustration at right to help identify the correct type of slot.
4. Insert the BitFlow board in this slot. Make sure the board is firmly seated in
the PCIe connector.
5. Secure the board to the PC with a screw on the edge connector.
6. Close the PC.
7. Connect your BitFlow board to your camera using a cable of the correct
type.
8. Reconnect the AC power cord to your PC.
9. Power up your camera.
10. Power up and boot your PC.
A Note On Windows Shutdown
By default, when you shut down a Windows system, it really goes to sleep (this
behavior can be turned off, which recommend). In this case, “sleep” means that
the system state is written to the hard drive and the components are powered
down. When the system is subsequently turned back on, it actually wakes
from sleep. If a new board is installed during this cycle, the operating system
may not see the new device. The simple solution is to perform a restart (warm
reboot) after the power up after installing new hardware.
x1 PCIe
x4 PCIe - Aon, Axion, Neon
x8 PCIe - Aon, Axion, Claxon, Cyton, Karbon, Neon
x16 PCIe - Aon, Axion, Claxon, Cyton, Karbon, Neon
Axion and Cyton require Gen 2 PCIe Slots
Claxon requires Gen 3 PCIe SLots
Bekijk gratis de handleiding van Advantech PCIE-1122B-AE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | PCIE-1122B-AE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1746 MB |
