Advantech PCIE-1122B-AE handleiding
Handleiding
Je bekijkt pagina 15 van 18
BitFlow, Inc. • 400 West Cummings Park, Suite 5050 • Woburn, MA 01801 USA • +1-781-932-2900 • www.bitflow.com
Getting Started with the BitFlow SDK 6.6 15
T Y
Here are some simple things you can check if your system is not working cor-
rectly:
If computer does not boot, or the computer hangs during the
boot process:
This problem is usually caused by another device conflicting with the board.
Try removing or disabling all other non-critical PCIe devices.
Try put the board in another PCIe slot.
Try reserving the IRQ of the device conflicting with the board, this can be done
in some BIOS’s.
Check to make sure you have the latest BIOS for your computer
LEDs are all blinking red (Cyton only)
The board is plugged into a PCIe slot that it is not compatible with. Please plug
the board into a p15-x8 or x16 Gen 2 PCIs slot.
If SysReg shows an error message and does not run or no
boards appears in SysReg, or only some of your boards appear
in SysReg, or boards are marked as “Missing”:
These symptoms may be seen when upgrading a system which has a previous
version of the BitFlow SDK on it. On some system the Plug and Play Wizard
gets confused. These problems are easily solved using the device manager
as follows.
First try rebooting your computer, this often clears up many problems.
If this does not work try the following procedure:
1. Run the device manager (Start > Control Panel > Administrative Tools >
Computer Management ).
2. Navigate to the BitFlow devices (Computer Management > System Tools
> Devices > Imaging Devices OR Computer Management > System Tools >
Devices > Other Devices).
3. All of the BitFlow boards should look like the image at top-right.
4. If any boards appear with the error icons as shown in the three lower images
at the right, then there is a problem with the plug and play configuration. To fix
this problem right click on the device in question and select Update or Enable.
Follow the instructions of the New Hardware Wizard (select “Install the software
automatically”). You will see a Windows warning dialog, click continue. After
the Hardware Wizard is finish, the device should work properly.
5. Repeat step 4 for all devices that have error icons.
6. You may need to reboot your computer after making these changes.
If none of the above options resolve the missing board issue, please try the
following
1. Make sure the board is tightly seated in the PCIe slot
2. Try the board in another PCIe slot
Device is OK
Yellow “!” - Configuration problem
Red “X” - Device disabled
Yellow “!” in other devices - Configuration
problem
Bekijk gratis de handleiding van Advantech PCIE-1122B-AE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | PCIE-1122B-AE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1746 MB |
