Advantech PCI-1285 handleiding
Handleiding
Je bekijkt pagina 37 van 247
29 PCI-1285/1285E User Manual
Chapter 5 Utility
5.3.2.4 Move Mode
Select Move Mode. There are three move modes in single-axis motion: P to P (point
to point motion), Continue (constant-speed continuous motion), Homing (homing
motion).
5.3.2.5 Speed Chart
By clicking [Speed Chart], you can see the velocity curve.
Wherein, on the right there are setting and operating buttons, on the left there is
movement/speed curve in single-axis motion.
5.3.2.5.1 Setting
Setting items are as follows:
1. Vertical Max Value: sets maximum vertical coordinate.
2. Time Length Value: sets maximum horizontal coordinate.
3. Spd Curve Color: setsthe color for speed curve.
4. Act Pos Curve: sets the color for actual position curve.
5. Cmd Pos Curve: sets the color for command position curve.
6. Y Source: data source for vertical coordinate. You can select any one or any
combination of velocity, command position and actual position as below.
Note: VelHigh in Single-axis Motion can not be greater than the Max Velocity; Acc.
can not be greater than the Max Acceleration and Dec. can not be greater
than the Max Deceleration.
Bekijk gratis de handleiding van Advantech PCI-1285, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | PCI-1285 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 31021 MB |
