Advantech PCE-7132 handleiding
Handleiding
Je bekijkt pagina 19 van 122
9 PCE-7132/5132/5032 User Manual
Chapter 1 Hardware Configuration
1.8.2 BIOS CMOS (JCMOS1)
The SBC CPU card contains a jumper that can erase BIOS CMOS/ME data and
reset the system BIOS information. Normally this jumper should be set with pins 1-2
closed. If you want to reset those data, set JCMOS1/JME1 to 2-3 closed for just a few
seconds, and then move the jumper back to 1-2 closed. This procedure will reset the
CMOS/ME to its last status or default setting.
1.8.3 Watchdog Timer Output (JWDT1)
The SBC contains a watchdog timer that will reset the CPU in the event the CPU
stops processing. This feature means the SBC will recover from a software failure or
an EMI problem. The JWDT1 jumper settings control the outcome of what the com-
puter will do in the event the watchdog timer is tripped.
(JOBS1) is a 2-pin connector for setting enable/disable alarm while the on-board
security event acts.
Table 1.3: JCMOS1/JME1: Clear CMOS/ME Data
Function Jumper Setting
*Keep BIOS CMOS/ME data
Clear BIOS CMOS/ME data
* default setting
1
1-2 closed
2-3 closed
Table 1.4: Watchdog Timer Output (JWDT1)
Function Jumper Setting
NC
* Reset
* default setting
Table 1.5: H/W Monitor Alarm (JOBS1)
Function Jumper Setting
Enabled
Disabled
2-4 closed
4-6 closed
1-2 closed (Default)
12
1-2 opened
12
Bekijk gratis de handleiding van Advantech PCE-7132, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | PCE-7132 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18432 MB |
