Advantech MIC-75M20 handleiding
Handleiding
Je bekijkt pagina 3 van 12
MIC-75M20-00 Startup Manual 3
Note: The MIC-75M20 has 2 bolts which must be
aligned with the holes on the device.
5. Reassmble the cover and secure with screws.
Note: The chassis cover has a special notch which
must mate with the hook on the chassis.
Chassis Cover
Chassis hook
FAN Installation (Optional)
The MIC-75M20 supports two 4x4 cm fan spaces. If you
want to install high-perfornamce expansion cards (for
example, graphics or a PoE card) and the total power
consumption is over 45W, you should install a fan for better
thermal management.
A fan is an optional module. If your system needs a fan,
please contact your distributor or sales representative.
Fan Module P/N: 98R1752000E
1
FAN CON
3
1
2
2
1. Undo fan covers 1 & 2.
2. Assemble and secure the fan in the chassis with 4
screws.
3. Plug the fan power cable into the connector on the
backplane board.
FAN Filter Installation
If your system has a fan installed, we recommend you
replace the system fan lter at regular intervals to ensure
the stability of system cooling.
You should nd one new fan lter with the fan module.
1. Undo the system cover and remove the old fan lter.
2. Change to the new fan lter and reassemble the system
cover with screws.
Simple Maintenance Process
(Cont.)
Simple Maintenance Process (Cont.)
Bekijk gratis de handleiding van Advantech MIC-75M20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | MIC-75M20 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2048 MB |
