Advantech MIC-713S-ON2A1 handleiding
Handleiding
Je bekijkt pagina 39 van 170
31 MIC-713 User Manual
Chapter 3 Board Placement Overview
3.1.15 Recovery Button/Reset Button/Micro USB Connector
To update your MIC-713, you must be in “Force USB Recovery Mode.” When in
“Force USB Recovery Mode”, you can update system software and write partition
configuration to the device.
Follow the below instruction for further updating:
1. To prepare a HOST PC. (About more HOST PC detail, please refer to software
update SOP file from the BSP Download page on https://www.advantech.com/
en/campaign/industrial-ai-iot-solution-nvidia/resource)
2. Before flashing the MIC-713, you must turn MIC-713 into “Force USB Recovery
Mode” manually.
(a) Shut down the MIC-713.
(b) Connect to the HOST PC via MIC-713 Internal micro USB port with the USB
cable. You can find this cable in the accessory box.
(c) Press and hold the onboard recovery button.
(d) Press the reset button.
(e) After 5 seconds, release the recovery button.
Make sure the MIC-713 is recognized by the Host PC successfully.
Type command: “lsusb” in the host PC. If you see “NVIDIA Corp” it means the
MIC-713 is in recovery mode.
NOTE:
1. User name & password of MIC-713 Orin NX platform: mic-713.
2. User name & password of MIC-713 Orin Nano platform: mic-713on.
3. Root name of the MIC-713 series product: root.
Bekijk gratis de handleiding van Advantech MIC-713S-ON2A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | MIC-713S-ON2A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 55197 MB |
