Advantech LEO-S552-TP handleiding
Handleiding
Je bekijkt pagina 17 van 27
www.advantech.com
17
17
1. Ensure the device time is correct, please refer Time Synchronization to sync the time.
2. Enable Data Storage and Data Retransmission feature.
Go to Device > Setting > LoRaWAN Settings to enable rejoin mode and set the number of
packets sent. For example, the device will send LinkCheckReq MAC packets to the network
server regularly to check any network disconnection; if there is no response for 32+1 times, the
join status will change to de-active and the device will record a data lost time point (the time it
reconnected to the network).
3. After the network connection is restored, the device will send the lost data from the point in
time when the data was lost according to the data retransmission interval (600s by default).
Note:
1) If the device is rebooted or re-powered when data retransmission is not completed, the
interrupted retransmission data will be retransmitted first after the network is reconnected to the
network, and then the newly triggered retransmission data will be transmitted.
2) If the network is disconnected again during data retransmission, it will only send the latest
disconnection data.
3) The retransmission data format is started with “20ce”, please refer to section Historical Data
Enquiry.
4) Data retransmission will increase the uplinks and shorten the battery life.
3.6 Maintenance
3.6.1 Upgrade
1. Download firmware from Advantech website to your smartphone or computer.
2. Click Browse to import firmware and upgrade the device.
Bekijk gratis de handleiding van Advantech LEO-S552-TP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | LEO-S552-TP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3382 MB |
