Advantech IDK-1107WR-50WSA1E handleiding
Handleiding
Je bekijkt pagina 27 van 51
21 IDK-1107WR User Manual
Chapter 3 Signal Characteristics
3.1.2 Signal Description (IDK-1107WR-50WSA1E)
CN2 LVDS connector: P1.0 20pin/CP100-S20G-H16
CN3 LED connector: ENTERY 3808K-F05N-03L
Note: Pin4: Dimming is PWM signal input. It is for brightness control.
Table 3.2: Symbol Description (IDK-1107WR-50WSA1E)
Pin No. Symbol I/O Description Note
1 VDD P Power Voltage for Logic: 3.3V
2 VDD P Power Voltage for Logic: 3.3V
3 GND P Ground
4 GND P Ground
5 IN0- I - LVDS differential data input
6 IN0+ I + LVDS differential data input
7 GND P Ground
8 IN1- I - LVDS differential data input
9 IN1+ I + LVDS differential data input
10 GND P Ground
11 IN2- I - LVDS differential data input
12 IN2+ I + LVDS differential data input
13 GND P Ground
14 CLK- I - LVDS differential data input
15 CLK+ I + LVDS differential data input
16 GND P Ground
17 IN3- I - LVDS differential data input
18 IN3+ I + LVDS differential data input
19 GND P Ground
20 SELB I 6bit/8bit mode select, “H”:6bits,
“L”:8bits.
Pin No. Symbol I/O Description Note
1 VCC P Power Voltage for Backlight: 12V
2 GND P Power Ground
3 ON/OFF I Backlight ON/OFF, “H” LED ON.
4 Dimming I PWM Adjust the LED brightness
5 NA - No Connection
ITEM SYMBOL MIN TYP MAX UNIT
ADJ (Dimming)
signal frequency
fPWM 5 -- 100 KHz
ADJ signal logic
level High
VIH 2.4V 3.3 5.5 V
ADJ signal logic
level Low
VIL 0 -- 0.8 V
Bekijk gratis de handleiding van Advantech IDK-1107WR-50WSA1E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | IDK-1107WR-50WSA1E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5896 MB |
