Advantech IDK-1105R-50VGB1 handleiding
Handleiding
Je bekijkt pagina 21 van 33
15 IDK-1105R-50VGB1 User Manual
Chapter 4 Touch Controller
4.2 Specifications
4.3 Product Package
ETP-MB-MER4040CFBG-ADV (4-wire control board)
Table 4.2: 4-Wire Type Controller
Circuit Board 20mm x 75mm (0.79″ x 2.95″)
Power Requirements
D.C.+5V (100mA typical, 50mV peak to peak maximum rip-
ple and noise)
Operating Temperature -25 to 85°C
Storage Temperature -25 to 85°C
Relative Humidity 95% at 60°C, RH Non-condensing
Interface
Bi-directional RS-232 serial communication
USB: 1.1 Full Speed
Protocol No parity,8 data bits,1 stop bit, 9600 baud (N,8,1,9600)
Resolution 2048 x 2048 resolution
Report Rate
RS232: Max. 180 points/sec
USB: Max. 200 points/sec
Response Time Max. 20 ms
Attached Cable
RS232: 180cm shielded cable with 9-pin D-sub connector
USB: 180cm shielded cable with USB-A connector
Regulatory Approvals FCC-B, CE
EMI Unaffected by environmental EMI
Panel Resistance
4-wire resistive model: 200 ~ 900 ohms
(Pin to pin on same layer, Touch Resistance under 3k ohms)
Environmental Compliance RoHS Compliant
MTBF 200,000 hrs
Bekijk gratis de handleiding van Advantech IDK-1105R-50VGB1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | IDK-1105R-50VGB1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4790 MB |
Caratteristiche Prodotto
| Gewicht | 230 g |
| Breedte | 127 mm |
| Diepte | 9.26 mm |
| Hoogte | 98.43 mm |
| Beeldschermdiagonaal | 5.7 " |
