Advantech Flex I/O 98910770340 handleiding

Niet gecategoriseerd

Advantech

9 pagina's

PDF beschikbaar

Handleiding

MIC-7_Flex_IO Startup Manual 3

Flex I/O Expansion

98910770320

98910770330

98910770340

98910770350

1. Read these safety instructions carefully.

2. Keep this startup manual for later reference.

3. Disconnect this equipment from any AC outlet before

cleaning. Use a damp cloth. Do not use liquid or spray

detergents for cleaning.

4. For plug-in equipment, the power outlet socket must

be located near the equipment and must be easily

accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installa-

tion. Dropping it or letting it fall may cause damage.

7. The openings on the enclosure are for air convection.

Protect the equipment from overheating. DO NOT

COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct

before connecting the equipment to a power outlet.

9. Position the power cord so that people cannot step on

it. Do not place anything over the power cord.

10. All cautions and warnings on the equipment should be

noted.

11. If the equipment is not used for a long time, disconnect

it from the power source to avoid damage by transient

overvoltage.

12. Never pour any liquid into an opening. This may cause

re or electrical shock.

13. Never open the equipment. For safety reasons, the

equipment should be opened only by qualied service

personnel.

14. If one of the following situations arises, get the equip-

ment checked by service personnel:

• The power cord or plug is damaged.

• Liquid has penetrated into the equipment.

• The equipment has been exposed to moisture.

• The equipment does not work well, or you cannot get

it to work according to the user manual.

• The equipment has been dropped and damaged.

• The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRON-

MENT WHERE THE STORAGE TEMPERATURE

MAY GO BELOW -40 °C (-40 °F) OR ABOVE 85°C

(185 °F). THIS COULD DAMAGE THE EQUIPMENT.

THE EQUIPMENT SHOULD BE IN A CONTROLLED

ENVIRONMENT.

16. CAUTION: THERE IS DANGER OF EXPLOSION

IF THE BATTERY IS INCORRECTLY REPLACED.

REPLACE ONLY WITH THE SAME OR EQUIVALENT

TYPE RECOMMENDED BY THE MANUFACTURER.

DISCARD USED BATTERIES ACCORDING TO THE

MANUFACTURER’S INSTRUCTIONS.

17. The sound pressure level at the operator’s position

according to IEC 704-1:1982 should be no more than

70 dB (A).

18. RESTRICTED ACCESS AREA: The equipment should

only be installed in a Restricted Access Area.

19. DISCLAIMER: This set of instructions is given accord-

ing to IEC 704-1. Advantech disclaims all responsibility

for the accuracy of any statements contained herein.

Simple Maintenance Process (Cont.) Safety Instructions

Serial Model

Bekijk gratis de handleiding van Advantech Flex I/O 98910770340, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.