Advantech EIS-D150 handleiding
Handleiding
Je bekijkt pagina 25 van 74
13 ARK-2250 User Manual
Chapter 2 H/W Installation
2.3.1.5 USB 3.0 Connector
The USB port USB port 1, 2, 3, 4 of ARK-2250 supports USB 3.0 interfaces, which
provides complete Plug-and-Play and hot swapping capabilities for up to 127 exter-
nal devices. The USB interface complies with USB UHCI, Rev. 3.0. Please refer to
Table. 2.7 for its pin assignments. USB 3.0 connectors contain legacy pins to inter-
face to USB 2.0 devices, and a new set of pins for USB 3.0 connectivity (both sets
reside in the same connector).
Figure 2.7 USB 3.0 Connector
2.3.1.6 USB 2.0 Connector
ARK-2250 provides two USB interface connectors. The USB 5, 6 connectors are
used to connect any device that conforms to the USB interface. Most digital devices
conform to this standard. The USB interface supports Plug and Play capabilities.
Figure 2.8 USB 2.0 Connector
Pin Signal name Pin Signal name
1 +5V 2 USB_data-
3 USB_data+ 4 GND
5 SSRX- 6 SSRX+
7 GND 8 SSTX-
9 SSTX+
Note! If your OS is Windows 7, please install the USB 3.0 driver from the Intel
website. https://downloadcenter.intel.com/download/25476/windows-7-
usb-3-0-creator-utility
Pin Signal name Pin Signal name
1 VCC 2 USB_data-
3 USB_data+ 4 GND
Bekijk gratis de handleiding van Advantech EIS-D150, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | EIS-D150 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13858 MB |
