Advantech ECU-1052 handleiding
Handleiding
Je bekijkt pagina 31 van 32
23 ECU-1052 User Manual
Chapter 4 Installation
4.2 Wall Mounting
The wall mounting clip is included as a standard accessory (packed in the accessory
box, including 4 screws of type M3 x 5L).The device can be affixed to a wall or
another surface using the wall mounting clip. The delivered wall mounting clip can be
assembled to the router as shown in Figure 4.1.
The wall mounting clip features two holes with a diameter of 4.5 millimeters for screw
placement. For precise mounting dimensions.
Figure 4.1 Wall Mounting Clip
4.3 DIN Rail Mounting
The DIN rail mounting clip is not included as a standard accessory; it can be ordered
separately under P/N OPT1-DIN-ICR1X-00.
You can attach the DIN rail clip to the device for mounting it onto a DIN rail that com-
plies with the 60715 standards. The default position of the clip is depicted in Figure
4.2. If necessary, the clip can also be rotated into all four positions.
Figure 4.2 Default Position of the DIN Rail Clip
Note! When attaching the wall mounting clip, tighten the screws with a maxi-
mum torque of 0.6 Nm (6 kg.cm).
Note! When attaching the clip, use 4 screws of type M3 x 5L, and tighten the
screws with a maximum torque of 0.6 Nm (6 kg.cm).
Bekijk gratis de handleiding van Advantech ECU-1052, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | ECU-1052 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3698 MB |
