Advantech ECU-1052 handleiding

32 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 30 van 32
ECU-1052 User Manual 22
4.1 Mounting Recommendations
The ECU-1052 can be placed in the following ways:
On a flat surface.
On a wall using the wall mounting clip (refer to Chapter 4.2).
On a DIN rail EN 60715 with the metal DIN rail clip (refer to Chapter 4.3).
For most applications involving a built-in device within a switchboard, two types of
environments are typically encountered:
A non-public industrial environment with low voltage but high interference.
A public environment with low voltage and without high interference.
For both of these environments, it’s feasible to mount the device to a switchboard,
eliminating the need for immunity examination or EMC-related issues as per EN
61439-1:2011 standards.
When using whip antennas, maintain a minimum distance of 6 cm from cables
and metal surfaces on all sides to avoid interference. If an external antenna is
used apart from the switchboard, a lightning conductor is necessary.
When mounting a device on sheet steel, consider using a cable antenna.
For all cables, it’s recommended to bundle them, following these guidelines:
The combined length of the cable bundle (power supply and data cables) should
not exceed 1.5 m. If data cable length surpasses 1.5 m or if the cable runs
toward the switchboard, installing surge protectors is advisable.
Data cables must not be bundled with mains voltage cables (230 V/50 Hz or 120
V/60 Hz).
Ensure sufficient space is left between each connector for cable handling.
For proper device functionality, use an earth-bonding distribution frame to
ground the grounding screw (refer to Chapter 2.5).
Note! To comply with the EN 61439-1:2011 specification, follow these assem-
bly instructions when attaching a device to a switchboard:

Bekijk gratis de handleiding van Advantech ECU-1052, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkAdvantech
ModelECU-1052
CategorieNiet gecategoriseerd
TaalNederlands
Grootte3698 MB