Advantech ECU-1052 handleiding
Handleiding
Je bekijkt pagina 18 van 32
ECU-1052 User Manual 10
Please note: The SIM card for ECU-1052 is micro-sized. According to the current tri-
cut SIM card adapters format issued by mainland Chinese carriers, there may be
poor contact issues. If poor contact occurs, you can further secure it by fixing the SIM
card in place using methods like taping it down.
2.3 Antennas Interfaces
The ANT and DIV SMA female connectors are designed for connecting the main and
diversity cellular antennas to the device.
2.4 Ethernet Interfaces
The RJ45 panel socket is used for one ETH0 and one ETH1 Ethernet interfaces. The
pinout of the socket is shown in Figure 14 and described in Table 5.
Figure 2.4 Ethernet Connector Pinout of RJ45 Socket
Caution!
Do not run the device without connected cellular antennas as the energy
from the transmission is effectively reflected by the open end and can
damage the equipment.
Note! Recommended tightening moment for screwing the antenna to the SMA
connector is 0.9 Nm.
Table 2.3: Ethernet Connector Pinout Description of RJ45 Socket
Pin 10base-T & 100base-T 1000base-T
1 Tx+ (Transmit Data+) BI_DA+ (BiDirectional pair A+)
2 Tx- (Transmit Data-) BI_DA- (BiDirectional pair A-)
3 Rx+ (Receive Data+) BI_DB+ (BiDirectional pair B+)
4 — BI_DC+ (BiDirectional pair C+)
5 — BI_DC- (BiDirectional pair C-)
6 Rx- (Receive Data-) BI_DB- (BiDirectional pair B-)
7 — BI_DD+ (BiDirectional pair D+)
8 — BI_DD- (BiDirectional pair D-)
Note! The isolation barrier of the Ethernet ports against the ground is 1500 V.
Bekijk gratis de handleiding van Advantech ECU-1052, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | ECU-1052 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3698 MB |
