Advantech BB-SR30918320-SWH handleiding
Handleiding
Je bekijkt pagina 35 van 58
SmartFlex SR309
5.9.10 Reset
When the PWR LED starts flashing on the front panel, it is possible to restore the de-
fault configuration of the router by pressing the RST button on the rear panel. After pressing
this button the default configuration will be restored and the router will reboot (after which the
green LED will be on).
It is necessary to use a narrow screwdriver or any other small tool to press the RST button.
Figure 32: Router reset
Before resetting the router, it is recommended to back up the router configuration settings
(see Configuration manual) because resetting the router will return all configuration set-
tings to their default states.
It is important to distinguish between the router reset and reboot.
Action Router behavior Invoking events
Reboot Turns off and then turns on the router Disconnect and reconnect the
power,
press the Reboot button in the web
configuration
Reset Restores the default configuration and
reboots the router
Press the RST button
Table 14: Description of router reset and restart
28
Bekijk gratis de handleiding van Advantech BB-SR30918320-SWH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | BB-SR30918320-SWH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8540 MB |
