Advantech ADAM-6350 handleiding
Handleiding
Je bekijkt pagina 13 van 88
7 ADAM-6300 User Manual
Chapter 2 Hardware Installation
2.3 I/O Module Wiring
A plug-in screw terminal block is used for the interface between I/O modules and field
devices. The following information must be considered when connecting electrical
devices to I/O modules.
The terminal block accepts Wire Size #16~28 AWG (stripped length: 6.5 mm)
Always use a continuous length of wire; do not combine wires
Use the shortest possible wire length
Use wire trays for routing where possible
Avoid running wires near high-energy wiring
Avoid running input wiring proximal to output wiring
Avoid creating sharp bends in the wires
Note! The wires should be at least 2 mm in diameter.
Bekijk gratis de handleiding van Advantech ADAM-6350, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | ADAM-6350 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17465 MB |
