Advantech ADAM-4150 handleiding
Handleiding
Je bekijkt pagina 20 van 144
ADAM-4100 User Manual 12
Micro USB Driver Installation
You can access ADAM modules by the /Apax .NET Utility. Before using the micro
USB interface, you must install the "CP210x" chip driver on your computer. The driver
can be downloaded from the Advantech website. After installation, you will see the
virtual COM port in the management system.
The ADAM-4100 micro USB interface was developed based on the standard COM
port, which makes it easy to be integrated in SCADA with the standard COM port
driver. Unlike other USB devices, extra effort does not need to be invested in USB
driver development for your SCADA system.
Module Configuration /Apax .NET Utility
1. Turn the switch to Init mode.
2. Connect the module to your computer via a USB cable. Open the Adam/Apax
.NET Utility and click Refresh Subnodes on the serial icon in the Module Tree
Display Area.
3. The COM port for the module will be shown in the utility; select it and change
the baud rate to 9600 and click Apply.
Bekijk gratis de handleiding van Advantech ADAM-4150, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | ADAM-4150 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20517 MB |
