Advantech ACP-4010 handleiding
Handleiding
Je bekijkt pagina 15 van 40
7 ACP-4010 User Manual
Chapter 2 System Setup
2.3 Installing the Backplane or Motherboard
ACP-4010 supports either; an up to 15-slot backplane or ATX motherboard. To install
the backplane or motherboard, please proceed as follows:
1. Dismantle the hold-down clamp by removing the two screws on its both
ends.
2. A yellow label is located inside of the chassis bottom (see Figure 2.2). It
shows the copper stub locations for attaching the specific backplane or
motherboard. Users can find the copper stubs in the accessory box. Be sure
to follow the instructions and fasten the backplane or motherboard onto the
chassis with the correct stub locations.
3. While installing a BACKPLANE, fasten it in place and attach the supplied
EMI spring shielding with the screws provided. (see Figure 2.3)
4. For the PICMG 1.0 BACKPLANE, connect the orange-white wire from con-
nector ‘HCN1’ on the backplane to connector ‘CN21’ on the CPU card.
5. While installing a MOTHERBOARD, attach the motherboard I/O shielding
onto the rear plate first. Then fasten the motherboard onto the chassis. (see
Figure 2.4)
6. Connect the 20-pin (or 24-pin) ATX power connector and the 4-pin +12 V
power connector from the power supply to the backplane or the mother-
board. (For the PICMG 1.0 BACKPLANE, the 4-pin +12 V power connector
is connected to the CPU card.)
7. Connect the 9-pin USB wire, Power switch wire, and the System Reset
switch wire from the chassis to the motherboard.
8. Connect the wire of LAN LED and HDD LED from the chassis to the mother-
board.
Figure 2.2: Yellow label indicating copper stub locations
Caution! Use caution when installing a motherboard. It is highly recommended to
integrate Advantech motherboard series with ACP-4010 chassis to
ensure the quality, safety and the air flow design.
AIMB-744
Be careful to screw the Copper Stub under 10 kgf cm.
AIMB-750
AIMB-760
AIMB-542
AIMB-762
AIMB-554
PCA-6114P12
PCA-6115
PCE-5B12-64
AIMB-742
AIMB-740
PCA-6114P12X
PCE-7B13-64
PCA-6113P7X
PCA-6114P10
PCA-6114P4
PCA-6114-B
PCA-6113P4R
PCA-6114P7
BP/MP MODEL
NUT NUMBER
221154
21
3910867 16151312 14 20 2117 18 19 27262423 25 MAX28 29
AIMB-556
AIMB-560
AIMB-562
AIMB-764
Bekijk gratis de handleiding van Advantech ACP-4010, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | ACP-4010 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3543 MB |
