Adler AD 7072 handleiding
Handleiding
Je bekijkt pagina 9 van 182
9
5. Plug the steam washer into the power supply and the 3 LEDs will start flashing, indicating the heating status.
6. After a few seconds, the LEDs will stop flashing and one of them will remain lit, indicating that the washer is ready
for use.
7. To generate steam, press the steam trigger button (13) (Fig. 7 page 4)
8. Use the steam control buttons to select a low, medium or high amount of steam generation, depending on your
specific cleaning requirements. (Fig. 8 page 4)
IMPORTANT:
a. Always disconnect the steam cleaner from the power supply by removing the floor head or handle.
b. Always make sure the washer has cooled completely before removing the floor head.
D. Accessories
Using accessories:
NOTE: Accessories can only be attached when using the machine in hand cleaner mode. With the exception of the
carpet pad.
8. Carpet pad- use for cleaning carpets, sofas, fabrics, etc.
15. Steam nozzle- use in heavily soiled areas such as bathroom, kitchen.
16. Extension hose- Use in conjunction with other accessories to clean hard-to-reach areas.
17. Curved nozzle - use in hard-to-reach areas.
18. Round brush - Use for stubborn grease and dirt.
19. Scraper - for cleaning grates and grates.
20. Crevice brush - use for cleaning crevices and grout.
21. Wiper pad - use for cleaning glass and mirrors.
23. Small cloth - Use in conjunction with the squeegee attachment to clean upholstery and windows.
NOTE: Before using the device on textiles, tiles, unprotected floors, first use the device in an invisible place and see if
the hot steam will not damage the material.
IMPORTANT: Before each use, check the gasket on the steam nozzle. If the seal is damaged or missing, do not use
the device. Contact an authorized service center.
Attaching nozzles to a handheld vaporizer
1. Attach the steam nozzle (15) or hose (16) to the steam outlet (14) in manual cleaner mode until the nozzle or hose
and turn clockwise until it is locked in a secure position.
2. Attach other small accessories to the nozzle or hose, insert it and turn clockwise until it is locked in the safe
position.
IMPORTANT: Before using the hand cleaner, make sure the accessories are firmly attached. If steam escapes from the
joints between the device and the accessories, it means that the accessories are not properly installed. Let the device
cool down, then remove and reinstall the accessories.
E. Troubleshooting
If you have any problems with the product, check the simple user checklist before contacting an authorized service
center.
Problem:
The steam cleaner does not turn on.
Solution:
1. Make sure the device is connected to the mains power supply.
2. Check the condition of the power cord for damage or looseness.
Problem:
The steam cleaner does not produce steam.
Solution:
1. Make sure there is water in the water tank.
2. Wait about 25 seconds after connecting.
Problem:
The textile pad does not pick up dirt.
Solution:
1. Make sure the textile pad is well cleaned.
Bekijk gratis de handleiding van Adler AD 7072, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adler |
| Model | AD 7072 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 21638 MB |
