Adler AD 7072 handleiding
Handleiding
Je bekijkt pagina 8 van 182
8
13. Steam trigger
14. Steam
outlet
15. Steam
nozzle
16. Extension hose
17. Curved nozzle
18. Round
brush
19. Scraper
20. Crevice brush
21. Window squeegee
22. Water
cup
23. Small
cloth
Before first use:
1. Remove all packaging and marketing materials from the device.
2. Using a damp cloth, wipe down all parts of the device except the plug and power cord.
Folding the device (floor cleaning / mop mode) :
1. Align the metal tube with the body of the washer and insert it into the hole. Make sure that the metal tube is
locked in place and secured. (Figure 1 page 3)
2. Mount the steam cleaner to the body. (Figure 2 page 3)
Before you start using the device:
1. Turn the water tank cap (2) counterclockwise and open it. (Fig. 3 page 3)
2. Fill the water tank with cold tap water and close the tank cap (2). (Fig. 4)
TIP: To reduce mineral buildup and prolong the life of the steam mop, distilled or demineralized water is strongly
recommended.
TIP: Do not add any chemicals, detergents or perfumes to the water tank.
Using the device in floor mop mode:
NOTE: Before using the device on textiles, tiles, unprotected floors, first use the device in an out-of-sight location and
see if the hot steam will damage the material.
Steam cleaning of hard floors
NOTE: Always sweep or vacuum the floor to remove dirt and debris before steam cleaning.
IMPORTANT:
a. Do not use the steam cleaner without the cloth pad (7) attached to the floor head (6).
b. Do not use the carpet pad (8) when cleaning hard floors.
1. Connect the steam cleaner to the power supply and the 3 LEDs will start flashing, indicating the heating status.
2. After a few seconds, the LED will stop flashing and one LED will remain on, indicating that the steam cleaner is
ready for use.
3. Tilt the washer by placing your foot on the floor head (6) and lowering the main body towards the floor. (Fig. 5
page 3)
4. Move the washer slowly forward and backward.
5. Use the steam control button to select low, medium or high steam volume, depending on your specific cleaning
requirements.(Fig. 8 page 3)
How to use the manual steam washer:
NOTE: Before using the device on textiles, tiles, unprotected floors, first use the device in an invisible place and see if
the hot steam will not damage the material.
1. Unplug the device from the power supply and make sure it has cooled down.
2. Press the release button (12) on the main body to remove the device.
3. Turn the water tank cap (2) counterclockwise and open it. (Fig. 3 page 3)
4. Fill the water tank and close the tank cap. (Fig. 4)
NOTE: Do not add any chemicals, detergents or perfumes to the water tank.
IMPORTANT: Always turn off and unplug the washer before adding water or replacing the cloth cap.
NOTE: Wash the textile overlay before use to remove dirt.
Bekijk gratis de handleiding van Adler AD 7072, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adler |
| Model | AD 7072 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 21638 MB |
