Adler AD 7062 handleiding
Handleiding
Je bekijkt pagina 10 van 160
10
Solution: Clean the filter
Technical details:
Charger input voltage: 100-240 V
Rated Voltage: 29.6V
Solution: Only use the original mains adaptor or a mains adaptor with identical specifications
Solution: Check the brush rollers, suction tube and suction opening for dirt/blockages
Problem: Icon A12 appeared.
Problem: Icon A9 flashes red.
Cause: Incorrect mains adaptor
Cause: Suction blocked
Cause: Brush roller not inserted correctly/blocked
Cause: Air flow blocked / Filter blocked
If the above solutions were not helpful in your problem please contact the service.
Input frequency: 50/60 Hz
Problem: Icon A10 appeared.
Motor power: 400 W
Solution: Check that the brush roller is correctly fitted and remove any blockages/dirt
Solution: Let cool, then check if the filters are not dirty or in need of cleaning.
Problem: Icon A9 and battery % is flashing at the same time.
Cause: Device is overheating
Battery capacity: 2200 mAh
Problem: Icon A11 appeared.
Power brush voltage: 29.6V
Power brush power: 15W
Charging time: Around 4-5 hours.
Use only with GQ18-360050-AG battery charger
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
Bekijk gratis de handleiding van Adler AD 7062, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adler |
| Model | AD 7062 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 15114 MB |
