Handleiding
Je bekijkt pagina 9 van 248
9
The main power button for the entire unit (1) is located on the left cooktop.
1. Press the power button (1) on the left cooktop.
The icons (12) on the display of the left and right cooktops will light up.
2. Press the option button (2), the display (7) will show the default power "1400" and the unit will start. Press the
"+"/"-" buttons (3/4) to select the desired power level: the "+" button (4) to increase and the "-" button (3) to decrease
the power. There are a total of 9 power levels to choose from: 200 W, 500 W, 800 W, 1000 W, 1200 W, 1400 W, 1600
W, 1800 W, 2000 W.
3. Press the option button (2) again to enter temperature mode. The ℃ icon (11) will light up. The display (7) will
show the default temperature of 200 ℃. Press the "+"/"-" buttons (3/4) to select the desired temperature level: the "+"
button (4) to increase and the "-" button (3) to decrease the temperature.
There are 10 temperature levels to choose from: 60 ℃, 80 ℃, 100 ℃ 120 ℃, 140 ℃ 160 ℃, 180 ℃, 200 ℃, 220 ℃,
240 ℃(temperature refers to the bottom of the pot).
4. If you want to use the timer, press the option button (2), the display (7) will show the default power "1400" and the
appliance will start.... Press the "+"/"-" buttons (3/4) to select the desired power level: the "+" button (4) to increase
and the "-" button (4) to decrease the power, then press the timer button (5 ). The display (7) will show the default time
"0:00". Press the "+"/"-" buttons to select the cooking time in the range of 0-3 hours, the "+" button (4) to increase it
and the "-" button(3) to decrease it. If you press and hold the "+" or "-" button, the time will change faster. After
selecting the desired time, press the timer button (5) again or wait 5 seconds until the timer is activated. The display
(7) will show time and power alternately (if the device is in temperature mode it will show time or temperature).
After the programmed time has elapsed, the induction stove will beep once and turn off automatically.
NOTE: If at any time during the cooking cycle you want to cancel the time setting, press the timer button (5).
5. Child lock button.
Pressing and holding "+" (3) and "-" (4) together for 3 seconds will activate the child lock, the icon (8) on the display
will light up.
The child lock can be used when the cooktop is heating up or in standby.
Only the child lock button and the power button (1) are available when the child lock is active.
Press and hold "+" (3) and "-" (4) simultaneously for 3 seconds to cancel the child lock function.
6.Press the power button (1) on the left side of the appliance to turn off the appliance after cooking.
CLEANING AND MAINTENANCE
It is recommended to wash the appliance after each use. Unplug the appliance from the power outlet and wait for it to
cool down.
Do not use gasoline, solvents, brushes or pastes to clean the induction cooktop.
Wipe the device with a damp cloth with dishwashing liquid. Use a vacuum cleaner to remove dirt from the air inlet
and fan grilles. Clean the glass surface and control panel with a soft damp cloth and mild glass cleaner.
Make sure that water does not drip on the unit, as this may cause damage. Never immerse the device or cable in water.
Any service, other than cleaning, should be performed by an authorized service representative.
Technical data:
Power: 3500 W
Power supply: 220-240V~ 50/60Hz
Attention hot surface:
The temperature of the accessible surfaces of the operating device may be high. Do not touch the
hot surfaces of the unit
Bekijk gratis de handleiding van Adler AD 6516, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adler |
| Model | AD 6516 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 24599 MB |