Handleiding
Je bekijkt pagina 8 van 248
8
6. Child lock
7. Display
8. Child lock icon
9. Timer icon
10. Power icon
11. Temperature icon
12. Power icon
Operation is the same for both left and right cooktops.
The appliance contains two independent cooktops, each cooktop can be individually switched and their power and
temperature can be increased or decreased.
The power of a single hotplate can be 2000W. When two cooktops are operating at the same time, an internal
controller coordinates the cooktops, the total power cannot exceed 3500W to ensure safety.
Example: Operating principle.
1. When the left cooktop is set to 2000W, and then you try to set 2000W on the right cooktop, the power of the left
cooktop will decrease to 1400W, and the right cooktop will operate at 2000W.
2. Both the left and right cooktops can be set to a maximum temperature of 240 ℃
3. Operation is the same for both the left and right cooktops.
BEFORE FIRST USE
NOTE: If the cookware is removed from the induction cooktop at any time during the cooking cycle, the unit will beep
for 60 seconds, the display (7) will show the error code E00 and the unit will turn off automatically.
NOTE: When the unit is turned off, the fan will continue to run and the display (7) will show the "H" symbol until the
cooktop temperature drops below 50 ℃.
NOTE: The diameter of the bottom of the cookware should not be less than 12 cm or more than 22 cm for the unit to
operate properly. If the pot is larger than the indicated field on the induction stove, the area outside the field will not
work, causing uneven heating.
NOTE: If the induction stove is turned on without a suitable cookware, the unit will beep for about 60 seconds, the
error code E00 will appear in the display window (7) and the unit will turn off automatically.
NOTE: When the appliance is turned off, the fan may continue to run until the temperature of the induction stove
drops below 50 ℃.
CAUTION: NEVER heat up empty cookware. This will cause the unit to overheat, damage the cookware and/or shut
down the unit.
Error codes:
E00:No cookware. It is necessary to place a suitable pot on the cooktop for the unit to work.
E01: voltage too low.
E02: voltage too high.
If error codes E01,E02,E03,E04,E05,E06,E07,E09,E0b,E0d,E12 appear, contact the service center for inspection and
repair.
HOW TO USE
Remove all packaging items and align the power cord.
1. Place the induction stove on a dry and flat surface.
2. Put the food in the dish.
3. Place the dish in the indicated place on the surface of the induction stove.
NOTE: Make sure the bottom of the dish is clean, as dirt may cause the bottom to stick to the surface of the induction
stove.
NEVER heat empty cookware. This will cause the unit to overheat, damage the cookware and/or shut down the unit.
4. Plug the appliance into a 220-240 V~ 50/60 Hz outlet. The unit will beep and all indicators will light up for one
second.
If no operation is performed within 15 seconds, the unit will return to the off state.
The operation is the same for both the left and right cooktops.
Bekijk gratis de handleiding van Adler AD 6516, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adler |
| Model | AD 6516 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 24599 MB |