Adj WiFLY WLC16 handleiding
Handleiding
Je bekijkt pagina 11 van 16
button again to resume output.
Clear All Functions -
1) Press the Blackout button and the button LED will glow. While the
button is active (button LED on) press and hold the Blackout button
for 2 seconds. The button LED will turn o and all channels will reset
to zero, and all active Scenes and Chases will shut o (including rel-
evant Scene and Chase LED’s).
PLAYBACK
Running Scenes
There are three modes in which you can run scenes. They are Manual
mode, Auto mode, and Music mode.
Manual Mode -
1) When the power is turned on, the unit enters manual mode auto-
matically.
2) Check and verify that both the Auto and Sound button LEDs are
o.
3) Use the Bank Up/Down buttons to select the Bank with the scenes
you wish to run. All LED’s with Scenes programmed to the relevant
button will be on.
4) Press the scene button corresponding to the scene you wish to
display. The LED with Scene programmed to the relevant button
will ash when the Scene is selected to play. Button LED’s with no
Scenes programmed to them will be o and the display will show
“Scene=00”.
Auto Mode -
This function allows you to run a Bank of programmed scenes in
sequence.
1) Press the AUTO button to enter into Auto mode. The Auto button
LED will glow indicating the Auto mode is active.
2) Use the Bank Up/Down buttons to select a Bank of scenes to run.
If the Bank of scene has no data, the LCD will display ”Empty”.
3) After selecting your Bank of scenes to run, you can use the speed
slider or tap the Tap Sync button twice to adjust the speed, use the
Fade Time slider to adjust the fade time of the scene progression.
4) Press the AUTO button to exit Auto mode.
Music Mode -
1) Press the SOUND button to activate Music mode.
2) Use the Bank Up/Down buttons to select a Bank of scenes to run.
The scenes selected will run in order to the beat of the music. If the
Bank of scene has no data, the LCD will display ”Empty”.
3) Use the Fade time slider to adjust the fade time of the scene pro-
gression.
4) Press the SOUND button to exit music mode.
RUNNINg CHASES
There are three modes in which you can run chases. They are Manual
mode, Auto mode, and Music mode.
Manual Mode -
1) When the power is turned on, the unit enters manual mode auto-
matically.
2) Check and verify that both the Auto and Music button LEDs are o.
3) Select your desired chase by pressing one of the six Chase but-
tons with the Bank you wish to run. The LED with Chase programmed
to the relevant button will ash when the Chase is selected to play.
Button LED’s with no Scenes programmed to them will be o and the
display will show “Bank=00 Scene=00”.
4) Use the Bank Up/Down button to select the Bank with the scenes
you wish to run.
Auto Mode -
1) Press the AUTO button to enter into Auto mode. The Auto button
LED will glow indicating the Auto mode is active.
2) Select your desired chase by pressing one of six Chase buttons.
ADJ Products, LLC www.adj.com - WiFly WLC16 Page 20
WiFly WLC16 Operation
ADJ Products, LLC www.adj.com - WiFly WLC16 Page 21
WiFly WLC16 Operation
Bekijk gratis de handleiding van Adj WiFLY WLC16, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | WiFLY WLC16 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2155 MB |
