Adj WiFLY WLC16 handleiding
Handleiding
Je bekijkt pagina 10 van 16
Set Speed In Auto Mode -
-
er or not a program is running
-
trol until the slider is moved again.
control slider.
Check Step In Chases -
Chases.
1st:
1) Press the Chase button to select the desired chase you wish to
many Steps have already been stored in the chase.
check. You can read the Steps in the LCD Display.
2nd:
1) Enter program mode (See Enabling Program Mode).
2) Press the Chase button to select the desired chase you wish to
stored in the chase.
check. You can read the steps in the LCD Display.
BLACKOUT
Pause The Whole Output -
press the button it will pause all output from the controller. Press the
WiFly WLC16 Operation
Steps in the LCD Display.
Delete A Chase -
1) Enter program mode (See Enabling Program Mode).
2) Press the button corresponding to the chase you wish to delete.
-
Delete all Chases -
1) Enter program mode (See Enabling Program Mode).
2) Press the any one of the chase buttons.
TAP SYNC
to check the Step in Chases.
WiFly WLC16 Operation
Bekijk gratis de handleiding van Adj WiFLY WLC16, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | WiFLY WLC16 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2155 MB |
