Adj WiFLY QA5 IP handleiding
Handleiding
Je bekijkt pagina 9 van 16
ADJ Products, LLC - www.adj.com - WiFly QA5 IP User Manual Page 17ADJ Products, LLC - www.adj.com - WiFly QA5 IP User Manual Page 16
WiFly QA5 IP ADJ RFC Operation
The ADJ RFC remote (sold seperately) has many different functions
and allows you to control your WiFly QA5 IP from long distance. The
ADJ RFC remote can control your system up to 150 ft. To use the
RFC you must first activate the fixtures receiver, to activate the re-
ceiver please see the instructions on page 12.
BLACkOUT - Pressing this button will blackout the fixture.
AUTO RUN - This button will run an automatic program. There are
3 Auto Run programs to choose from. Each press of the button will
switch between the different modes. You can control the speed of the
Auto Run modes by pressing the SPEED button and then pressing
the “+” and “-” buttons.
• AFXX = Color Fade mode, there are 16 Color Fade modes to
choose from. Use the UP or DOWN buttons to scroll through the
different Auto Fade modes.
• AJXX = Color Change mode, there are 16 Color Change modes to
choose from. Use the UP or DOWN buttons to scroll through the
different Auto Change modes.
• A-JF = Both Color Fade and Color Change modes running.
PROGRAM SELECTION - Press this button to switch between Static
Color mode and Slave mode. Each press of this button will switch be-
tween the two modes. When in Static Color mode, use the “+” or “-”
to scroll through the 64 colors. Once you have found your color, you
can press the FLASH button to activate strobing and use the “+” or
“-” to adjust the Flash rate.
FLASH - This button will activate the flash (strobe) effect. You can
control the flash speed by pressing the “+” and “-” buttons.
SPEED - Press this button and use the “+” & “-” buttons to adjust the
speed of the Auto run mode.
R G B W/A - Press either one of these buttons and the press the “+”
or “-” to adjust the brightness. Press the FLASH button to activate
strobing and use the “+” or “-” to adjust the Flash rate.
“+” and “-” - Use these buttons to adjust the flash rate, speed of the
Auto Run mode, Auto Run program selection, and color select.
Channel Value Function
1 RED
0 - 255 0% - 100%
2 GREEN
0 - 255 0% - 100%
3 BLUE
0 - 255 0% - 100%
4 AMBER
0 - 255 0% - 100%
5 MASTER DIMMER
0 - 255 0% - 100%
WiFly QA5 IP 5 Channel - DMX Values & Functions
WiFly QA5 IP 4 Channel - DMX Values & Functions
Channel Value Function
1 RED
0 - 255 0% - 100%
2 GREEN
0 - 255 0% - 100%
3 BLUE
0 - 255 0% - 100%
4 AMBER
0 - 255 0% - 100%
Bekijk gratis de handleiding van Adj WiFLY QA5 IP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | WiFLY QA5 IP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2651 MB |
