Adj WiFLY NE1 handleiding
Handleiding
Je bekijkt pagina 17 van 22
17
UPDATE INFORMATION
To perform a software update, follow the directions below:
1. Load the updated software onto a USB drive. There should be a folder with the name “ADJ-NE1”
with a software le titled “ADJ-NE1.SUP”. It is recommended to have the USB drive empty of all les
other than the software le.
2. Switch off the unit’s main power, and plug the USB with the updated software into the unit’s USB
port.
3. Press and hold the Memory 3, Memory 4, and Setup buttons while switching the unit’s power back
on. The word “LOAD” will be displayed on the screen, and the unit will begin downloading the
updated software.
4. The screen will prompt you to reboot the unit when the software download has been completed.
Power the unit down, then switch it back on and navigate to the software information section of the
system menu to conrm that the software version number has been updated.
Note: Software version numbers 1.0 through 1.2 are only capable of reading USB ash drives up to
1GB in size. Software version 1.4 is capable of reading USB ash drives up to 8GB, and software
version 2.0 is capable of reading USB ash drives up to 16GB.
Bekijk gratis de handleiding van Adj WiFLY NE1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | WiFLY NE1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2537 MB |
