Adj WiFLY NE1 handleiding
Handleiding
Je bekijkt pagina 16 van 22
16
OPERATION
Firmware Version
Note:This is a read only menu option that will display the con- trollers current software version.
1. Press the SET-UP button for two seconds to enter the main menu.
2. Turn the DIAL/ENTER dial to menu option 16 (Firmware Ver- sion). Press the DIAL/ENTER dial to
enter. Press the ESC/PAGE button to exit.
Fixture Control, Saving, & Playing Memories
Note: Although the generic proles may work for you, it is rec- ommended that you load and use the
custom proles that were provided on the USB sitck that was included with your control- ler. The custom
proles may offer you additional control and features that the generic proles do not include. If you
wish to use the custom proles, please refer to the LOADING FIXTURE PROFILES section of this user
manual and load them before proceeding. After you have patched your xtures, you can con- trol and
save memories using the following steps.
1. Press the FIXTURE button then select the xtures, using the FUNCTION 1-12 buttons, that you
want to control. If you are using multiple xtures of the same type and want to control them at the
same time, you can press the rst and last buttons so all xtures in between are selected at the
same time. For ex- ample, I have patched 6 xtures on buttons 1-6, to select them all quickly, I would
simultaneously press buttons 1 & 6 so all 6 xtures are selected.
2. Press the COLOR button and add a color by using the FUNCTION 1-12 buttons. Turn the DIAL/
ENTER dial to switch between two pages of preset colors (Note: your xture must support this
feature to function).
3. Press the GOBO button and add a gobo by using the FUNCTION 1-12 buttons. Turn the DIAL/
ENTER dial to switch between two pages of preset gobos (Note: your xture must sup- port this
feature to function).
4. Press the EFFECT button and add an effect by using the FUNCTION 1-12 buttons. Turn the DIAL/
ENTER dial to switch between three pages of effects. In the display, you will see ML EFFECT (for
moving lights) and RGB EFFECT 1 and RGB EFFECT 2 (for RGBWA+UV LED’s) plus the speed,
phase, size, and direction settings, which can be controlled from the four EFFECT rotary dials. You
can pause an effect at any time by pressing the PAUSE button. (Note: your xture must support this
feature to function).
5. Press the SHOW button and enable a show by using the FUNCTION 1-12 buttons. (Note: your
xture must support this feature to function).
6. You can also set all channel values manually. If you have already set your scene and want to
store it. please see step 7 now. To make manual channel adjustments, press the FIXTURE button,
then press the DIAL/ENTER dial for two seconds, the display will list channels 1-4 along with their
current values. Use the four EFFECT dials to adjust each channel listed in the display. Channels are
displayed four at a time. To access additional channels, turn the DIAL/ENTER dial clockwise and
counter-clockwise
7. To save your current output, press and hold down any of the six MEMORY buttons until the display
reads “Operation Complete!”. Press that same MEMORY button a second time to playback from that
memory location, it should illuminate solid green. Repeat steps 1-6 to store additional memories.
There are two memory banks. To access the secondary memory bank press the ESC/PAGE button.
If there is a memory running, that MEMORY button will ash letting you know that is actively running
in the other bank. If your memory includes an “EFFECT”, you can pause the effect by pressing the
PAUSE button.
8. You can trigger the STROBE button at any time during play- back. The STROBE button will function
relative to the STROBE RATE fader setting. Adjusting your STROBE RATE fader will give you DMX
control over your xtures shutter or RGBWA+UV channels. This function cannot be stored into a
memory.
9. You can manually adjust the MASTER DIMMER fader at any time during playback to set the overall
intensity for you active xtures. This function cannot be stored into a memory.
Bekijk gratis de handleiding van Adj WiFLY NE1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | WiFLY NE1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2537 MB |
