Adj Vizi Scan LED Pro handleiding

Niet gecategoriseerd

Adj

26 pagina's

PDF beschikbaar

Handleiding

American DJ® - www.americandj.com - Vizi Scan LED PRO Instruction Manual Page 20American DJ® - www.americandj.com - Vizi Scan LED PRO Instruction Manual Page 19

Vizi Scan LED PRO System Menu

number 1, if you press the UP button until “T0-3” is displayed,

the unit will test the color channel, changing the color one by

one and showing the rainbow effect with different speeds.

4. Press MODE/ESC to exit.

PLAY MENU -

RUN Run the unit in an Auto mode as a “master” in a

Master/Slave conguration, or as a stand alone unit -

1. Access the main menu.

2. Tap the UP button until “PLAY” is displayed, press ENTER.

3. Tap the UP button until “RUN” is displayed, press ENTER.

4. Tap the UP or DOWN button to choose between “MSTR” or

“ALON“, select your choice by pressing ENTER, “PASS” will ash

in the display and xture will begin its function.

AUDI Run the unit in Sound Active mode as a “master”, or

as a stand alone unit -

1. Access the main menu.

2. Tap the UP button until “PLAY” is displayed, press ENTER.

3. Tap the UP button until “AUDI” is displayed, press ENTER.

4. Tap the UP or DOWN button to choose between “MSTR” or

“ALON“, select your choice by pressing ENTER, “PASS” will ash

in the display and xture will begin its function.

AUTO This is a precaution mode in case you lose the DMX

signal. The xtue has 4 modes to choose from, please see

page 16 for a description of the 4 modes -

1. Access the main menu by pressing MODE/ESC button.

Vizi Scan LED PRO System Menu

On-Board System Menu.

The Vizi Scan LED PRO comes with an

easy to navigate system menu. This next section will detail the func-

tions of each command in the system menu.

ADDR MENU -

ADDR DMX Address Setting via control board -

1. Access the main menu.

2. Tap the UP button until “ADDR” is displayed, press ENTER.

3. “A001” will now be displayed. Press the UP or DOWN buttons

to nd your desired address. Press ENTER to conrm.

4. The display will show “PASS”, and then display, your selected

address again.

5. Press the MODE/ESC button to return to the main menu.

When the display is on “A001”, you can directly press the UP

or DN buttons to change the DMX start address.

TEST MENU -

TEST - This will test the functions of each channel.

1. Access the main menu.

2. Tap the UP button until “TEST” is displayed, press ENTER.

3. The display will show “T0-1”, “1” stands for the channel

To access the main menu locate the ENTER button (7) on the front

of the unit. Press this button to activate the system menu. Tap the

UP button (5) or DOWN button (6) until you reach function you wish

to change. When you reach the function you wish to change tap the

ENTER button. When a function is selected the menu will begin to

ash, use the UP button to change the function. Once your changes

are made tap the ENTER button again to lock the change in the system,

if the ENTER button is not selected within eight seconds the system

will automatically return to menu section. To exit without making any

changes tap the MODE/ESC button (4).

Bekijk gratis de handleiding van Adj Vizi Scan LED Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.