Adj Vizi Q Wash7 handleiding
Handleiding
Je bekijkt pagina 24 van 41
Vizi Q Wash7 System Menu
Pan Invert - With this function you can reverse the Pan movement.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons
so that “Function” is highlighted, then press ENTER. This function is used with DMX
mode.
2. Press the LEFT or RIGHT buttons until “Status” is displayed, press ENTER.
3. Press LEFT or RIGHT buttons, until “Pan Invert” is displayed, and press ENTER.
4. Either “Off” or “On” will be displayed, use the LEFT or RIGHT buttons to toggle
between.
5. Press ENTER to conrm your selection or press MODE to exit.
Tilt Invert - With this function you can reverse the left head Tilt movement. This function
is used with DMX mode.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons so
that “Function” is highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until “Status” is displayed, press ENTER.
3. Press LEFT or RIGHT buttons, until “Tilt Invert” is displayed, and press ENTER.
4. Either “Off” or “On” will be displayed, use the LEFT or RIGHT buttons to toggle
between.
5. Press ENTER to conrm your selection or press MODE to exit.
Pan Degree - With this function you can change the pan degree from 630 to 540. This
function is used with DMX mode.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons so
that “Function” is highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until “Status” is displayed, press ENTER.
3. Press LEFT or RIGHT buttons, until “Pan Degree” is displayed, and press ENTER.
4. Either “540” or “630” will be displayed, use the LEFT or RIGHT buttons to toggle
between.
5. Press ENTER to conrm your selection or press MODE to exit.
Feedback - With this function, you have the pan and tilt position feedback while out of
step or not feedback while out of step.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons so
that “Function” is highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until “Status” is displayed, press ENTER.
3. Press LEFT or RIGHT buttons, until “Feedback” is displayed, and press ENTER.
4. Either “Off” or “On” will be displayed, use the LEFT or RIGHT buttons to toggle
between.
5. Press ENTER to conrm your selection or press MODE to exit.
ADJ Products, LLC — www.adj.com — Vizi Q Wash7 — Page 24
Bekijk gratis de handleiding van Adj Vizi Q Wash7, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Vizi Q Wash7 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5770 MB |
