Adj Vizi CMY 16RX handleiding
Handleiding
Je bekijkt pagina 27 van 43
ADJ Products, LLC ! ww.adj.com ! VIZI CMY 16RX User Instructions Page 27
System Menu: When making adjustments press ENTER to confirm your setup
then press and hold the MENU button for at least 3 seconds. To exit without
making any adjustments press the MENU button. The display will lock after
30 seconds; press the MENU button for 3 seconds to unlock.
DMX FUNCTIONS
DMX
Address
: With this function, you can adjust the desired DMX address via the
Control Board.
1. Access the main menu, and press the UP or DOWN buttons so that
“DMX
Settings” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “DMX Address” is displayed, and press
ENTER. The current DMX address will now be displayed.
3. Use the UP or DOWN buttons to adjust the DMX address.
4. Press ENTER to confirm or press MENU button to return to the main menu.
DMX Channel Mode: With this function, you can select your desired DMX Channel
Mode.
1. Access the main menu, and press the UP or DOWN buttons so that
“DMX
Settings” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Channel Mode” is displayed, and press
ENTER. The number of DMX channels will now be displayed.
3. Press the MENU button to return to the main menu.
DMX State: This mode can be used as a precaution mode, that in case the DMX
signal is lost, interrupted, or power is lost, the operating mode chosen in this setup
is the running mode the fixture will go into when the DMX signal is lost. You can
also set this as the running mode you would like the unit to return to when power
is applied.
1. Access the main menu, and press the UP or DOWN buttons so that
“DMX
Settings” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “DMX State” is displayed, and press ENTER.
Use the UP and DOWN buttons to switch between the two modes (Blackout or
Hold). Press the ENTER button to make your selection.
• HOLD - If the DMX signal is lost the fixture will stay in the last DMX setting. If
power is applied and this mode is set, the unit will automatically go into the
last DMX set up.
• BLACKOUT - If the DMX signal is lost or interrupted, the unit will
automatically go into stand by mode.
3. Press the MENU button to return to the main menu.
VIZI CMY 16RX
System Menu
Bekijk gratis de handleiding van Adj Vizi CMY 16RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Vizi CMY 16RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7863 MB |
