Adj Ultra Bar 12 handleiding

16 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 7 van 16
ADJ Products, LLC - www.adj.com - Ultra Bar 12 User Manual Page 12 ADJ Products, LLC - www.adj.com - Ultra Bar 12 User Manual Page 13
Master-Slave Configuration:
This function will allows you to link units together to run in a Master-Slave
mode. In Master-Slave operation one unit will act as the controlling unit
and the others will react to the controlling units built-in programs. Any
unit can act as a Master or as a Slave however, only one unit can be pro-
grammed to act as the “Master.”
Master-Slave Connections and Settings:
1. Daisy chain your units via the XLR connector on the rear of the unit.
Use standard XLR data cables to link your units together. Remember
that the Male XLR connector is the input and the Female XLR con-
nector is the ouput. The first unit in the chain (master) will use the
female XLR connector only. The last unit in the chain will use the
male XLR connector only.
2. Set the “Master” unit to your desired operating mode and then
connect the “Slave” unit or units.
3. For the “Slave” unit(s) press the MODE button until “SLAu” is dis-
played. The “Slave” unit(s) will now follow the “Master” unit.
Ultra Bar 12 Master-Slave Configuration Ultra Bar 12 Section Program Modes
3 Section & 6 Section Mode:
The Ultra Bar 12 can be switched between a 3 section mode and a
6 section mode. The pixels will chase/move through these sections
These section modes work with the Built-In Programs 4 and 6-22 and
certain DMX Channel modes.
1. Before powering on the unit, press and hold the MODE and UP
buttons. While you are pressing these buttons apply power. Either
“Adj3” (3 Section mode) or “Adj6” (6 Section mode) will be dis
played.
2. If the mode that is displayed is not the mode that you wanted,
uplug the unit and repeat step 1.
Section 3
3 Section Mode
6 Section Mode
Section 1 Section 2
Section 1 Section 2 Section 3 Section 4 Section 5 Section 6

Bekijk gratis de handleiding van Adj Ultra Bar 12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkAdj
ModelUltra Bar 12
CategorieNiet gecategoriseerd
TaalNederlands
Grootte2234 MB