Adj Ultra Bar 12 handleiding
Handleiding
Je bekijkt pagina 6 van 16
ADJ Products, LLC - www.adj.com - Ultra Bar 12 User Manual Page 10
ADJ Products, LLC - www.adj.com - Ultra Bar 12 User Manual Page 11
Ultra Bar 12 Operating Instructions
3. Use the UP or DOWN buttons to scroll through the DMX Channel
modes. The Channel modes are listed below:
• To run the 3 Channel Mode, press the MODE button until “Ch.03”
is displayed. This is the 3 Channel DMX Mode.
• To run the 5 Channel Mode, press the MODE button until “Ch.05”
is displayed. This is the 5 Channel DMX Mode.
• To run the 6 Channel Mode, press the MODE button until “Ch.06”
is displayed. This is the 6 Channel DMX Mode.
• To run the 7 Channel Mode, press the MODE button until “Ch.07”
is displayed. This is the 7 Channel DMX Mode.
• To run the 8 Channel Mode, press the MODE button until “Ch.08”
is displayed. This is the 8 Channel DMX Mode.
• To run the 9 Channel Mode, press the MODE button until “Ch.09”
is displayed. This is the 9 Channel DMX Mode.
9 Channel mode is only available when the unit is in 3
Section Mode. See page 13 to set the 3 Section Mode.
9 Channel Mode will work with Kling-Net.
• To run the 11 Channel Mode, press the MODE button until
“Ch.11” is displayed. This is the 11 Channel DMX Mode.
11 Channel mode is only available when the unit is in 3
Section Mode. See page 13 to set the 3 Section Mode.
• To run the 18 Channel Mode, press the MODE button until
“Ch.18” is displayed. This is the 18 Channel DMX Mode.
18 Channel mode is only available when the unit is in 6
Section Mode. See page 13 to set the 6 Section Mode.
18 Channel Mode will work with Kling-Net.
• To run the 20 Channel Mode, press the MODE button until
“Ch.20” is displayed. This is the 20 Channel DMX Mode.
20 Channel mode is only available when the unit is in 6
Section Mode. See page 13 to set the 6 Section Mode.
4. Please see pages 15-25 for DMX values and traits.
5. After you have chosen your desired DMX Channel mode plug in
the fixture via the XLR connections to any standard DMX control-
ler.
Default Running Mode:
This is a default running mode. When this mode is activated all modes
will return to their default settings and a Auto program will run.
1. Plug the fixture in and press the MODE and SET UP buttons at the
same time.
ADJ RFC:
This function is used to activate and deactivate the ADJ RFC (Remote
Control). When this function is activated you can control the fixture
using the ADJ RFC. Please see page 14 for ADJ RFC controls and
functions.
1. Plug the fixture in and press the MODE button until “Auto” is dis-
played.
2. Press the SET UP button until “rF.XX” is displayed. “XX” repre-
sents either “on” or “oF”.
3. Press the UP or DOWN buttons to either activate the remote func-
tion (On) or deactivate it (Off).
Dimming Curve:
This is used to set the dimming curve used with DMX mode. See
page 27 for the different dimming curves. The dimming curves are in
the order they appear in the unit.
1. Plug the fixture in and press the MODE button until the DMX
address is displayed.
2. Press the SET UP button until “dr-X” is displayed. This is the dim-
mer setting. “X” represents the dimming mode.
3. Use the UP and DOWN buttons to find your desired dimming
curve. Press SET UP when you are finished.
Ultra Bar 12 Operating Instructions
Bekijk gratis de handleiding van Adj Ultra Bar 12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Ultra Bar 12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2234 MB |
