Adj Pixie Driver 8000 V2 handleiding
Handleiding
Je bekijkt pagina 13 van 28
13
DRIVER OUTPUT LIMITATIONS
There is a limitation to how many pixels can be controlled by each driver output port, which in turn
determines the maximum number of lighting xtures that can be controlled by a single output or driver.
The values listed in the following tables for number of xtures per driver port/driver unit are representative
of the maximum number of xtures that can be connected if the xtures used are all of the same model
type, with individual pixel control.
For example, if you connect only Pixie Strip 30s to the driver, and operate the driver in Kling-Net mode,
you can connect up to 34 units of that model type to each driver port. This is dened by the fact that
each driver port can handle a maximum of 1020 pixels, and each Pixie Strip 30 xture is made up of 30
pixels. Therefore, you have 1020 pixels per driver port, divided by 30 pixels per xture, which equals
34 xtures per driver port.
It is possible to mix and match Pixie Strip model types that are attached to a single driver port. In this
case, the important thing to keep in mind is the maximum number of pixels per driver port.
As long as this value is not exceeded, any combination of Pixie Strip 30s, 60s, and 120s may be used.
MODEL
TOTAL
PIXELS
TOTAL
CONTROL
CHAN.
KLING-NET / ART-NET / sACN
MAX PIXELS PER PORT = 1020
MAX PIXELS PER DRIVER = 8160
MAX
FIXTURES per
DRIVER PORT
MAX
PIXELS
per
DRIVER
PORT
MAX
FIXTURES
per
DRIVER UNIT
MAX
PIXELS
per
DRIVER
UNIT
Pixie Strip 30 30 90 34 1020 272 8160
Pixie Strip 60 60 180 17 1020 136 8160
Pixie Strip 120 120 360 8 960 64 7680
Bekijk gratis de handleiding van Adj Pixie Driver 8000 V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Pixie Driver 8000 V2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2167 MB |
